|
| |
Stereoscopic Player Command Line Parameters
Input source and output settings of Stereoscopic Player can be specified
using the following command line parameters.
Syntax
StereoPlayer.exe [{Filename | -file:Filename
| -dvd:Directory | -url:URL
| -svi:Filename} [-il:Input Layout]
[-is:Input Separation] {[-ihw] [-ihh]
| [-ax:
] [-ay:
]} [-inf:Information File] [-src:Source]
[-img:JPEG Filename] [-fp] [-play]
[-fss]] [-ol:Output Layout] [-os:Output
Separation] [-ohw] [-ohh][-nl][-term][-termsc]
A parameter must not contain blanks. If a filename or path contains blanks,
you must put it between quotation marks. Never insert blanks after ':' between
parameter names and parameter values!
Source Parameters
| Filename |
|
You can either specify a video or svi-filename but you
cannot open DVDs or URLs this way (use the -dvd or -url parameter
instead). |
| -file:Filename |
|
Opens Filename. Filename must be a video
file supported by Stereoscopic Player (e.g. avi, mpg, wmv, ...). |
| -dvd:Directory |
|
Opens the DVD in the specified directory. It is
recommended to enter the path without the 'VIDEO_TS' folder. |
| -url:URL |
|
Opens a video file or stream hosted on an Internet
server. |
| -svi:Filename |
|
Imports the stereoscopic information file in the video
library and tires to play the movie. Please note that the video file or
DVD data must be located in the same directory as the svi-file so that
they can be found. |
Input Settings Parameters
These parameters are only valid if one of the source parameters is used.
| -il:Input Layout |
|
Stereoscopic layout of the video (input layout). The
following values are allowed:
| Mono |
|
Monoscopic |
| InterlacedRF |
|
Interlaced, right line first (InterleavedRL until version
0.7.5) |
| InterlacedLF |
|
Interlaced, left line first (InterleavedLF until version
0.7.5) |
| SideBySideRF |
|
Side by side, right image first |
| SideBySideLF |
|
Side by side, left image first |
| OverUnderRT |
|
Over / under, right image top |
| OverUnderLT |
|
Over / under, left image top |
| SIS |
|
SIS attachment |
|
| -is:Input Separation |
|
Separation between left and right image in pixel. A
separation is only valid for side by side or over/under layout. For
other layouts, don't use this parameter. |
| -ihw |
|
Video has half horizontal resolution. Can't be used
together with -ihh or the.aspxect ratio parameters. |
| -ihh |
|
Video has half vertical resolution. Can't be used
together with -ihw or the.aspxect ratio parameters. |
| -ax:
|
|
The -ax and -ay parameters can be used to
specify the.aspxect ratio of the video and always have to used together.
They are especially useful if the video is codec anamorphic (non-square
pixels).
For square pixels video you can use the -ihw or -ihh flags to specify
the .aspxect ratio. However, if -ax and -ay are used, -ihw or -ihh have
no affect. |
| -ay:
|
|
| -inf:Information File |
|
Filename (including path) of a text file that contains
information about the video. The file extension must be 'txt'. |
| -src:Source |
|
Source of the video. This can be a web address, a name or
any other kind of source information. |
| -img:JPEG Filename |
|
Filename (including path) of an image in JPEG format that
should be used a preview image. The image resolution has to be exactly
160 x 120 Pixel, the file size must be lower than 10240 byte. |
| -fp |
|
This flag forces that all of these parameters are used
even if there is already an item in the video library. Using this flag,
the command line parameters can be used to update existing library
items. |
Output Settings Parameters
| -ol:Output Layout |
|
Stereoscopic viewing method to be applied. The following
values are allowed:
| Source |
|
Unaltered input video. Aspect ratio settings are
ignored. |
| MonoL |
|
Monoscopic, left image only |
| MonoR |
|
Monoscopic, right image only |
| Dual |
|
Dual screen output |
| StereoBright |
|
Dual screen output, StereoBright™ |
| OpenGL |
|
Quad buffered OpenGL |
| Sharp |
|
SHARP 3D display |
| SIS |
|
SIS attachment |
| SideBySideRF |
|
Side by side, right image first |
| SideBySideLF |
|
Side by side, left image first |
| OverUnderRT |
|
Over / under, right image top |
| OverUnderLT |
|
Over / under, left image top |
| InterlacedRT |
|
Row interlaced, right line top |
| InterlacedLT |
|
Row interlaced, left line top |
| InterlacedLF |
|
Column interlaced, right line first |
| InterlacedRF |
|
Column interlaced, left line first |
| TrueAnaRB |
|
True anaglyph red - blue |
| TrueAnaBR |
|
True anaglyph blue - red |
| TrueAnaRG |
|
True anaglyph red - green |
| TrueAnaGR |
|
True anaglyph green - red |
| GrayAnaRC |
|
Gray anaglyph red - cyan |
| GrayAnaCR |
|
Gray anaglyph cyan - red |
| GrayAnaYB |
|
Gray anaglyph yellow - blue |
| GrayAnaBY |
|
Gray anaglyph blue - yellow |
| HColAnaRC |
|
Half color anaglyph, red - cyan |
| HColAnaCR |
|
Half color anaglyph cyan - red |
| HColAnaYB |
|
Half color anaglyph yellow - blue |
| HColAnaBY |
|
Half color anaglyph blue - yellow |
| ColAnaRC |
|
Color anaglyph red - cyan |
| ColAnaCR |
|
Color anaglyph cyan - red |
| ColAnaYB |
|
Color anaglyph yellow - blue |
| ColAnaBY |
|
Color anaglyph blue - yellow |
| OptAnaRC |
|
Optimized anaglyph red - cyan |
| OptAnaCR |
|
Optimized anaglyph cyan - red |
|
| -os:Output Separation |
|
Output separation in 1/10 percent, e.g. value 10 means 1
%. A separation is only valid for side by side or over /under viewing
method. For other viewing methods, don't use this parameter. |
| -ohw |
|
Half viewing width. |
| -ohh |
|
Half viewing height. You need this flag for example if
you want to use the over / under viewing method and a sync-doubling
shutter glasses controller. |
| -play |
|
Play the file immediately. This parameter parameter is
only valid if one of the source parameters is used. Available since
version 0.7. |
| -fss |
|
Switch to full screen mode. This parameter parameter is
only valid if one of the source parameters is used. Available since
version 0.7. |
| -nl |
|
Prevents that the logo is shown during program startup.
Available since version 0.9.4. |
| -term |
|
Terminates the player when leaving full screen mode. |
| -termsc |
|
Terminates the player on a single mouse click while in
full screen mode. |
Note that the player remembers settings for each viewing method separately
(except complementary viewing methods), therefore the -os, -ohw and -ohh
parameters only affect the viewing method specified in -ol parameter (or the
previously used viewing method if -ol is not specified).
|
