SLR Shepherd
|
Automatic or manual shutter offset control.
| Displays shutter sync in msec and fractional seconds.
| Automatic or manual control of flash contact time.
| Flash output control for first or second curtain flash timing.
| Protects camera from high voltage flash units.
| Long life internal lithium battery power.
| Custom cables to cameras made to order. | |
Compatible Cameras: Compatible cameras have support for an external wired shutter switch and an external flash. Cameras with only wireless/infrared remote control, or only control through a serial, USB, or Firewire port are not compatible (for example Nikon D50 and D70 are not compatible, but the D70s is compatible). Compatible cameras include but are not limited to the following:
Canon Digital: 300D/Rebel, 350D/Rebel XT, 400D/Rebel XTi, 10D, 20D, 30D,
40D, D60, 1D, 1Ds, 5D.
| Canon Film: Rebel T2, EOS-3, EOS-V1
| Nikon Digital: D1, D1H, D1X, D2H, D2Hs, D2X, D3, D70s, D100 (with battery
pack), D200, D300.
| Nikon Film: FM3A, F100, F5, F6.
| Pentax Digital: *ist D, *ist DS, *ist DS2, *ist DL, K10D, K100D, K110D.
| Pentax Film: *ist, ZX-L, ZX-M.
| Fuji Digital: S3.
| Kodak Digital: DCS Pro SLR/n, DCS Pro 14n.
| Konica Minolta Digital: 5D, 7D.
| Sony Digital: Alpha DSLR-A100, Alpha DSLR-A700.
| Olympus Digital: E-1, E-10, E-20, E-300 with battery holder. | |
Compatible Flash Units: Flash or wireless trigger with a regular two conductor sync cord connection. Examples include but are not limited to hotshoe, PC, household, and PocketWizard wireless. The SLR Shepherd provides high voltage protection for the cameras, so an older high voltage flash system can be used without an additional protection device. The SLR Shepherd does not support at this time TTL flash mode.
User Manual: Additional information about the SLR Shepherd and detailed user instructions.
A pair of standard cables custom made to connect your cameras
is needed with the SLR Shepherd. Please see below for the correct cable
for your camera. The cables
between the SLR Shepherd and your cameras will be made specifically for your
camera model.
| 103SLR | SLR Shepherd | $444.95 |
Below are cords for pairing your cameras and below that for attaching your flash to the SLR Shepherd.
Cables for SLR Shepherd- You will need these cords to connect the SLR Shepherd to your cameras.
These are for use with a non-Sony flash and your Lanc Shepherd Pro or Lanc Shepherd SLR. If you would like to trigger a non-Sony flash with your Lanc Shepherd Pro these are the cords you will need.
(these are custom so may add a few days to your order).
If you already have a PC cable for your flash and some way to mount the
flash, you can use a “PC Female to Lanc Adapter”, plug the PC cable
into the adapter, then plug the adapter into the LANC Shepherd Pro or SLR Shepherd
generic flash
jack.
| 103CPCF | PC Female Adapter to Lanc Pro or SLR Shepherd .(this assumes you have a PC cord) |
$19.50
|
Camera Cords for the SLR Shepherd
![]()
Sample Image.
Crossed
View Parallel
View.
SLR Shepherd with a pair of Canon D20 digital SLR cameras.
[ Order
] Berezin Stereo Photography Products 21686 Abedul, Mission Viejo, CA 92691 USA (949) 215-1554 fax (949) 581-3982 Please contact us with questions or comments about this web site. All content, unless otherwise noted ©2007 Berezin Stereo Photography Products |