Slide Bars and Vertical MountsA Slide Bar enables you to take a pair of photos for stereo viewing, of still life scenes, with a single camera. If you are new to 3D-Photography, we recommend the book Ferwerda's World of 3D. The Slide Bar is attached mounted on a tripod. The Roller Block is attached
to your camera, then slipped onto the Bar. A pair of photos is taken, one on the
left of center, one on the right. After processing, the slides are viewed using
any of the hand-held viewers or projector set-ups that will take regular
2"x2" slides or hand mounted full-frame slides. Alternatively
you can use a digital camera and vi We offer Slide bars in several convenient lengths: 8" (20.32 cm), 12" and 18" (40.64 cm). A special Single Vertical Mount is available to mount cameras vertically instead of horizontally. These are all made by Jasper. Slide Bars for Medium Format, Large SLR's and Heavy Duty Work are Now available in the following lengths: 18" - 28" - 38" with Twin Roller Blocks, Bubble Levels and End Safety Stops. 8" Slide BarThe 8" (20.32 cm) Slide Bar is compact and fits easily into your camera bag. The roller block and bar are designed with color coded indent positioning, at center and three positions each side of center. It is made of machined aluminum so it is quite precise.
Features Has standard tripod mounting hole for mounting to your tripod!
12" Slide Bar
Heavy Duty Slide BarsNEW- Our 18 and 28 inch slide bars now have scales! Great for lenticular
The Heavy Duty Twin Camera Slide Bars (HDSLB's) can be used with one or two Roller Blocks, for single still life or twin camera live action stereo photography. The Bar has Engraved Lines for the Block center alignment and lines 1¼" (31.75 mm) each side of the Block position, to be used as reference points to set the Adjustable Sliding Stops at your desired spacing. The Blocks and moveable Sliding Stops are removable for camera mounting. They are also equipped with soft tipped Thumb Screw Locks for steady action. A Bubble Level is inset into the Bar and the Bar is equipped with spring loaded Safety Button Stops on each end so that your camera won't accidentally roll off the Bar. The Bars also make a great focusing rail for macro photography. Has standard tripod mounting hole for mounting to your tripod!
Vertical MountsThese are for fixing your cameras in vertical or portrait format Fixed
- Twin Vertical Mount For twin camera vertical format stereo photography. Used with cameras which have the mounting screw hole in line with centerline of the camera lens. These brackets can be tripod mounted or used with the Interocular Bar. They can also be used in conjunction with the 18" Slide bar The flush style allows the cameras to get closer together and allows for a larger variety of cameras. It requires the use of a hex wrench (included). Has standard tripod mounting hole for mounting to your tripod! Limited Supplies Discontinued but we have 2 left ![]()
Single Vertical Mount
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 118 | Single Vertical Mount with knobs | 34.95 |
![]()
Adjustable - Twin
Vertical Mount
These brackets have a moveable mounting screw, to compensate for the offset of the mounting screw hole from centerline of the camera's lens in some cameras. The various mounting options are the same as those for the "Fixed Mounts" as described above. Has standard tripod mounting hole for mounting to your tripod!
| 124 | Twin Vertical mount- Adjustable screws | 149.95 |
![]()
![]()
The Twin Camera Vertical Mount with "Toe-In"
Feature allows you to mount two cameras vertically. You may either choose
to shoot with both cameras parallel, or "Toe-In", which means that the stereo
image will be taken with converging optical axis. The latter is useful when shooting
fairly close subjects (at a distance less than 10 ft./3 meters),
although "Toe-In" will always result in a slight trapezoidal distortion of
the images.
We offer both a fixed version and an adjustable version. Both versions feature:
|
||||||||||
|
||||||||||
| The Illustrations above show the "Tow-In" Vertical Mount (Cameras are NOT included) as well as the Base with "Toe-In" Detail and Engraved Reference Lines and the dimensions of the Mount. |
![]()
|
"Toe-In" Vertical Mount - Fixed
For Cameras with mounting screw hole in line with centerline of the cameras. Has standard tripod mounting hole for mounting to your tripod! |
|
|
|
| 122T | Twin Vertical mount- Fixed screws Toe In | 109.95 |
![]()
|
"Toe-In" Vertical Mount - Adjustable
For Cameras with mounting screw hole offset with centerline of the cameras lens. Has standard tripod mounting hole for mounting to your tripod! |
|
|
Adjustment
Screw Detail
|
|
| 124T | Twin Vertical mount- Adjustable screws-Toe In | 175.95 |
![]()
Please note:
The Cameras and Brackets
are for demonstration
purposes only!
[ Order
] Berezin Stereo Photography Products 21686 Abedul, Mission Viejo, CA 92691 USA (949) 215-1554 fax (949) 581-3982 Please contact us with questions or comments about this web site. All content, unless otherwise noted ©2007 Berezin Stereo Photography Products |